ELFÿð4X4 (  ÿðÿð¨x¨p©xÿñ©xÿñ©xdtåQ0123456789abcdefghijklmnopqrstuvwxyz0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZSandpoint initialized... Parity ECC SPD data too short Broken checksum 0x%x, should be 0x%x SDRAM Only Data width incorrect 3.3V TTL DIMMS only CL %d: cycle %dns access %dns Bank %d: %dMB Dimm %d: %dMB CL%d (%s): Running at CL%d %s (none) Configuring DIMMS... Disabling memory bank %d (cas latency) Memory bank %d disabled: row bits %d and banks %d not supported Timings out of range Setting memory configuration registers... MCCR1 = 0x%08x MBEN = 0x%02x MSAR1 = 0x%08x MSAR2 = 0x%08x MSAR3 = 0x%08x MSAR4 = 0x%08x MEAR1 = 0x%08x MEAR2 = 0x%08x MEAR3 = 0x%08x MEAR4 = 0x%08x MCCR2 = 0x%08x MCCR3 = 0x%08x MCCR4 = 0x%08x done. No RXAK I2C device not present Probing DIMMS... Part Number: %s Configured %dMB memory